Try to make Fedora17 run on Beaglebone – 3

Use minicom to see the connection message (when SD card include Angstrom Bootfs(kernel) and Fedora 17 Rootfs):

{

Welcome to minicom 2.5
OPTIONS: I18n
Compiled on Jan 14 2012, 12:40:23.
Port /dev/ttyUSB1

Press CTRL-A Z for help on special keys
U-Boot SPL 2011.09-00000-gf63b270-dirty (Apr 24 2012 – 09:51:01)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.09-00000-gf63b270-dirty (Apr 24 2012 – 09:51:01)

I2C:   ready
DRAM:  256 MiB
No daughter card present
NAND:  HW ECC Hamming Code selected
nand_get_flash_type: second ID read did not match 10,10 against 00,00
No NAND device found!!!
0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning – readenv() failed, using default environment

Net:   cpsw
Hit any key to stop autoboot:  0
SD/MMC found on device 0
reading uEnv.txt

33 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc …
Loading file “/boot/uImage” from mmc device 0:2 xxa2
** File not found /boot/uImage
Booting from nand …

no devices available
Wrong Image Format for bootm command
ERROR: can’t get kernel image!
U-Boot#

}

The error message shows a file not found. So I  copy the Ang uImage to F17 boot/uImage

{
U-Boot#
U-Boot SPL 2011.09-00000-gf63b270-dirty (Apr 24 2012 – 09:51:01)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img

U-Boot 2011.09-00000-gf63b270-dirty (Apr 24 2012 – 09:51:01)

I2C:   ready
DRAM:  256 MiB
No daughter card present
NAND:  HW ECC Hamming Code selected
No NAND device found!!!
0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning – readenv() failed, using default environment

Net:   cpsw
Hit any key to stop autoboot:  0
SD/MMC found on device 0
reading uEnv.txt

33 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc …
Loading file “/boot/uImage” from mmc device 0:2 xxa2
3179944 bytes read
## Booting kernel from Legacy Image at 80007fc0 …
Image Name:   Angstrom/3.2/beaglebone
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    3179880 Bytes = 3 MiB
Load Address: 80008000
Entry Point:  80008000
Verifying Checksum … OK
XIP Kernel Image … OK
OK

Starting kernel …

Uncompressing Linux… done, booting the kernel.
[    0.222354] _omap_mux_get_by_name: Could not find signal leds-gpio
[    0.522999] omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift
systemd-fsck[64]: Angstrom: clean, 16860/218592 files, 142314/873534 blocks

Fedora release 17 (Beefy Miracle)
Kernel 3.2.16 on an armv7l (ttyO0)

fedora-arm login: [    4.912123]
[    4.912130] CPSW phy found : id is : 0x7c0f1
[    4.918881] PHY 0:01 not found

}

It log in success.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s